Name: GE DS200TBQEG1B RST LM6000 Analog Module - RUNSHENG
Price: 8888.00 AED
Availability: InStock

GE DS200TBQEG1B RST LM6000 Analog Module

د.إ8,888.00

The DS200TBQEG1B board is located in the R1 core of the Mark V control panel and is essential for processing vital turbine data.

LM6000 Specific: The “LM6000” in its name indicates it contains the specific circuitry and termination points required for the unique instrumentation of the GE LM6000 Gas Turbine, which is widely used for industrial power generation and marine propulsion.
Analog Termination: It is the connection point for numerous analog signals, including those used for:
- Vibration and Proximity: Inputs from proximity transducers and accelerometers for monitoring rotor health and vibration.
- Position Feedback: Inputs from LVDT/R (Linear Variable Differential Transformer/Resolver) transducers used for valve and actuator position control.
- Temperature: Inputs from RTDs (Resistance Temperature Detectors).
- Speed Monitoring: Pulse rate signals for low-pressure (LP) shaft speed monitoring and shear protection applications.
- Control Outputs: It also receives and terminates $\text{4-20 mA}$ output signals from the main controller board for controlling field devices.
Signal Routing: It writes these processed input signals to the TCQE (Turbine Control Quadrature/Analog) board for further processing by the Mark V’s I/O engine.

الوصف

GE DS200TBQEG1B RST LM6000 Analog Module

The GE DS200TBQEG1B RST LM6000 Analog Module is a critical component used in the General Electric Speedtronic Mark V turbine control system, specifically tailored for the LM6000 Aeroderivative Gas Turbine.

Its primary function is to serve as the Analog Termination Module (TBQE), acting as the interface where the physical wires from various sensors and field devices connect to the control system’s internal electronics.

⚙️ Key Function and Application

The DS200TBQEG1B board is located in the R1 core of the Mark V control panel and is essential for processing vital turbine data.

LM6000 Specific: The “LM6000” in its name indicates it contains the specific circuitry and termination points required for the unique instrumentation of the GE LM6000 Gas Turbine, which is widely used for industrial power generation and marine propulsion.
Analog Termination: It is the connection point for numerous analog signals, including those used for:
- Vibration and Proximity: Inputs from proximity transducers and accelerometers for monitoring rotor health and vibration.
- Position Feedback: Inputs from LVDT/R (Linear Variable Differential Transformer/Resolver) transducers used for valve and actuator position control.
- Temperature: Inputs from RTDs (Resistance Temperature Detectors).
- Speed Monitoring: Pulse rate signals for low-pressure (LP) shaft speed monitoring and shear protection applications.
- Control Outputs: It also receives and terminates $\text{4-20 mA}$ output signals from the main controller board for controlling field devices.
Signal Routing: It writes these processed input signals to the TCQE (Turbine Control Quadrature/Analog) board for further processing by the Mark V’s I/O engine.

🧩 Technical Details

Feature	Detail
Manufacturer	GE General Electric
Series	Speedtronic Mark V
Functional Acronym	TBQE (Termination Board Quadrature/Analog – LM6000)
Board Type	Analog Termination Module / PC Board PLC/Add-On Board
Terminals	Features two large terminal blocks, often with 95 signal wire connections each.
Connectors	Includes multiple 34-pin connectors (JLLR, JQQR, JLLS, JQQS, etc.) for ribbon cable connections to the TCQE board.
Configuration	Contains jumpers (e.g., BJ1 and BJ2) to select the maximum current output range (e.g., $20 \text{ mA}$ or $200 \text{ mA}$ ) for specific signals.

As this is a component of a legacy industrial control system, it is typically available through specialized industrial automation suppliers as new, refurbished, or repairable units.